LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Fuses And Relays) >> PDM Relay Box >> Repair procedures >> Inspection >> Notes

Repair procedures: Inspection: Notes

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front seat heater switch.

    (Refer to SEAT HEATER SWITCH .)

  3. Remove the PDM relay box (A) after loosening the screws (2EA) and disconnecting the connector.
    Fig 1: Identifying PDM Relay Box
    G06873686Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals