LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Transfer Assembly) >> Front Wheel Transfer Assembly >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.
    NOTE:
    • Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
    • Smear involute splines (B) all covering with molybdenum type high pressure grease.

    TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

    Fig 1: Identifying O-Ring And Involute Splines
    G06875095Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals