Repair procedures: Removal

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear wheel & tire.
Tightening torque:

88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)
Remove the rear shock absorber. [2WD Only]
(Refer to the REAR SHOCK ABSORBER .)
Remove the rear upper arm. [2WD Only]
Loosen the hose eyebolt (B) and caliper mounting bolts (C), then remove the rear caliper assembly (A).
Tightening torque:

Brake hose to caliper (B):

24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)

Caliper assembly to carrier (C):

78.5 ~ 98.1 N.m (8.0 ~10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

Fig 1: Identifying Front Caliper Assembly With Hose Eyebolt And Caliper Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the rear brake disc by loosening the screws (A).

Fig 2: Identifying Rear Brake Disc Screws
Courtesy of HYUNDAI MOTOR CO.