LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Disc Brake System) >> Brake Pedal >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different car, the 2011 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the bushing for wear.
  2. Check the brake pedal for bending or twisting.
  3. Check the brake pedal return spring for damage.
  4. Check the stop lamp switch.
    1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
    2. The stop lamp switch is in good condition if there is no continuity when plunger (A) is pushed.
      Fig 1: Identifying Stop Lamp Switch
      G06874520Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals