LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Sorento Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Auto Lighting Control System >> Auto Light Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw (-) driver.
    Fig 1: Identifying Auto Light Sensor
    G07420221Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the auto light connector.
scientia non olet · About LEMON Manuals