LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Intake Actuator >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the glove box (Refer to CRASH PAD .
  3. Disconnect the intake actuator connector.
  4. Loosen the mounting screw and then remove the intake actuator (A) from the blower unit.
    Fig 1: Identifying Intake Actuator
    G06829844Courtesy of KIA MOTORS AMERICA, INC.
  5. Install in reverse order of removal.
scientia non olet · About LEMON Manuals