LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Blower Resistor >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Disconnect the blower resistor connector (A) at the connecting part blower unit.
  3. Remove the blower resistor after loosening the mounting screws.
    Fig 1: Identifying Blower Resistor Connector
    G06829839Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals