LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis >> Electrical >> Horns >> Repair procedures >> Inspection >> Horn Relay Inspection

Horn Relay Inspection

  1. Remove the horn relay (A) from the engine room relay box.
  2. There should be continuity between the No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 4 terminals.
  3. There should be no continuity between the No. 1 and No. 2 terminals when power is disconnected.
    Fig 1: Identifying Horn Relay
    G06832141Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Identifying Horn Relay Terminals
    G06832142Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Horn Relay Continuity Chart
    G06832143Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals