LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Rio Base >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) & Sensors >> Occupant Classification Sensor (OCS) >> Repair procedures >> Installation

Repair procedures: Installation

  1. Install the OCS equipped seat cushion.

    (Refer to SEAT CUSHION COVER REPLACEMENT .

  2. Install the front seat assembly. (Refer to FRONT SEAT .
  3. Reconnect the battery negative cable.
  4. After installing the OCS, confirm proper system operation : Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.

    Telltale lamp will turn on for 4 seconds and be turned off afterward.

scientia non olet · About LEMON Manuals