LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.4L) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  1. Installation is reverse of removal.

    Rail Pressure Sensor Installation:  18.0 ~ 22.0 N.m (1.8 ~ 2.2 kgf.m, 13.3 ~ 16.2 lb-ft)

scientia non olet · About LEMON Manuals