LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Optima SX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - 2.4L) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B), and then remove the valve from the engine.

    Bank 1/Intake 

    Fig 1: CVVT Oil Control Valve Connector & Bolt (Bank 1/Intake)
    G07381714Courtesy of KIA MOTORS AMERICA, INC.

    Bank 1/Exhaust 

    Fig 2: CVVT Oil Control Valve Connector & Bolt (Bank 1/Exhaust)
    G07381715Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals