LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Soul Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Module >> Side Airbag (SAB) Module >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
  2. Remove the front seat assembly. (Refer to FRONT SEAT .)
  3. Remove the seat back cover. (Refer to FRONT SEAT .)
    NOTE: When the front side airbag deployed after a collision, replace the seat back as an assembly.
  4. Loosen the SAB mounting nuts and remove the SAB module.
Fig 1: Identifying SAB Mounting Nuts
G06524878Courtesy of KIA MOTORS AMERICA, INC.
WARNING: The removed airbag module should be stored in a clean and dry place with the cushion side up.
scientia non olet · About LEMON Manuals