LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Soul Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Control Systems >> Motor Driven Power Steering Diagnosis >> DTC C1604: ECU Hardware Error >> Inspection Repair >> Component Inspection

Component Inspection

  1. Ignition "OFF".
  2. Ignition "ON" & Engine "OFF".
  3. Connect scantool and select "Diagnostic Trouble Codes(DTCs)" mode.
  4. Using a scantool, Clear DTC.
  5. Select "Diagnostic Trouble Codes(DTCs)" mode again.
  6. Are any DTCs present?

    YES 

    • Substitute with a known-good steering column & EPS unit assembly check for proper operation. If problem is corrected, replace steering column & EPS unit assembly and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Fault is intermittent, caused either by poor contact in connectors or wiring harness, or it has been repaired and EPS CM memory is not cleared yet.

      Go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals