LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Sedona LX >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Motor >> Repair procedures >> Body Electrical System >> Replacement >> Sliding Power Window Motor

Sliding Power Window Motor

  1. Remove (-) negative battery terminal.
  2. Remove the sliding door trim panel. (Refer to the REAR DOOR )
  3. Remove the door trim seal and glass.
  4. Remove the door regulator.
  5. Remove the power window motor (A) after disconnecting the motor connector and power window motor mounting nuts.
    Fig 1: Identifying Power Window Motor
    G06839043Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals