Repair procedures: Reassembly

After inserting the transfer driven gear (A), install the taper roller bearing (C) by using a press machine (B).

Fig 1: Identifying Transfer Driven Gear And Taper Roller Bearing
Courtesy of KIA MOTORS AMERICA, INC.
After inserting the parking gear (A) and the output gear (B), install them with a press machine (C).

Fig 2: Identifying Parking Gear And Output Gear
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: At the parking gear's assembly, the grooved surface heads lower part.
After installing the thrust race and bearing, install the roller bearing (A).

Fig 3: Identifying Roller Bearing
Courtesy of KIA MOTORS AMERICA, INC.
After fixing the gear assembly (B) in a vise, tighten the lock nut (A) and apply caulking.
TORQUE :

156.9~176.5Nm (1600~1800 Kgf.cm, 115.7~130.2 lb-ft)

Fig 4: Identifying Gear Assembly And Lock Nut
Courtesy of KIA MOTORS AMERICA, INC.