LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Automatic Transaxle System >> Differential >> Repair procedures >> Disassembly

Repair procedures: Disassembly

  1. Clamp the differential case in a vise.
  2. Remove the differential drive retaining bolts (A) and remove the differential drive gear (B) from the case (C).
    Fig 1: Removing Differential Drive Retaining Bolts
    G06799255Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the taper bearing (A) using the sst (09457-22000).
    CAUTION: Do not reuse the bearing removed from the shaft.
    Fig 2: Pressing Taper Bearing
    G06799256Courtesy of KIA MOTORS AMERICA, INC.
  4. Drive out the lock pin (B) from the hole A using a punch.
    Fig 3: Identifying Lock Pin
    G06799257Courtesy of KIA MOTORS AMERICA, INC.
  5. Drive out the pinion shaft.
  6. Remove the pinion gear, washers, side gear and spacers.
scientia non olet · About LEMON Manuals