LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Supplemental Restraints System Control Module (SRSCM) >> Side Impact Sensor (SIS) >> Repair procedures >> Removal >> Rear Side Impact Sensor

Rear Side Impact Sensor

  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the rear pillar trim. (Refer to REAR PILLAR TRIM REPLACEMENT )
  3. Disconnect the Side Impact Sensor connector.
  4. Remove the SIS mounting bolt then remove the Side Impact Sensor.
    Fig 1: Locating SIS Mounting Bolt
    G06838311Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals