LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Relay >> Repair procedures >> Engine Electrical System >> Inspection

Engine Electrical System: Inspection

  1. Remove the fuse box cover.
  2. Remove the starter relay (A).
    Fig 1: Identifying Starter Relay
    G06838008Courtesy of KIA MOTORS AMERICA, INC.
  3. Using an ohmmeter, check that there is continuity between each terminal.
    CONTINUITY SPECIFICATION

    Terminal Continuity
    30 - 87 NO
    85 - 86 YES
  4. Apply 12V to terminal 85 and ground to terminal 86.

    Check for continuity between terminals 30 and 87.

    Fig 2: Identifying Starter Relay Connector Terminals
    G06838009Courtesy of KIA MOTORS AMERICA, INC.
  5. If there is no continuity, replace the starter relay.
  6. Install the starter relay.
  7. Install the fuse box cover.
scientia non olet · About LEMON Manuals