LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo LX, 2.7 6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System -- 2.7L >> ETC (Electronic Throttle Control) System >> Repair procedures >> Inspection >> ETC Motor

ETC Motor

  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 5 and 8.
  4. Check that the resistance is within the specification. Refer to "SPECIFICATION ".
scientia non olet · About LEMON Manuals