Trip Switch

Disconnect the negative (-) battery terminal.
Remove the cluster fascia panel (A) after loosening 2 screws.

Fig 1: Identifying Cluster Fascia Panel & Screws
Courtesy of KIA MOTORS AMERICA, INC.
Pull out the cluster (A) from the housing after removing 4 screws.

Fig 2: Identifying Cluster & Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the cluster connectors and then remove the cluster.
Remove the cluster fascia panel (A).

Fig 3: Identifying Cluster Fascia Panel
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 4: Trip Switch Continuity Chart
Courtesy of KIA MOTORS AMERICA, INC.