LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo LX, 2.4 9 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System -- F4A42 >> Inhibitor Switch >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Pull up the parking brake.
  2. Position the shift lever in 'N' range.
  3. Remove the air cleaner assembly.
  4. Remove the battery.
  5. Remove the battery tray.
  6. Remove the inhibitor switch connector.
  7. Remove the shift cable mounting nut (A).
    Fig 1: Identifying Shift Cable Mounting Nut
    G06386475Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the inhibitor switch loosening the mounting bolts.
  9. Referring to 'INSPECTION', check for continuity. If there is an error, replace the inhibitor switch.
    Fig 2: Checking Inhibitor Switch Continuity
    G06386476Courtesy of KIA MOTORS AMERICA, INC.
  10. After tightening the shift cable mounting nut, connect the inhibitor switch.
  11. Install the battery, battery tray and the air cleaner assembly.
scientia non olet · About LEMON Manuals