Power Window Main Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim. (Refer to the FRONT DOOR )
Disconnect the 16P connector from the switch.

Fig 1: Identifying Power Window Main Switch
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Identifying Power Window Main Switch Terminals
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Terminals Continuity Reference Chart - Power Window Main Switch
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Terminals Continuity Reference Chart (Auto Up/Down Window) - Power Window Main Switch
Courtesy of KIA MOTORS AMERICA, INC.