Neutralizing Of SMARTRA

The EMS can be set to the status "neutral" by tester

Ignition key (regardless of key status) is inserted and after IGN ON. If receiving the correct vehicle password from GST, SMARTRA can be neutralized. The neutralization of SMARTRA is possible if DPN is same as the value inputted by GST.

In the case that the SMARTRA status is neutral, the EMS keeps the lock state. And the start is not possible by "twice ignition".

In the case of changing the vehicle password, a new virgin transponder must be used. In the case of a virgin key, the key can be used after performing the "Key Teaching Procedure" in TEACHING PROCEDURES .

If wrong vehicle specific data have been sent to SMARTRA three times continuously or intermittently, the SMARTRA will reject the request to enter neutral mode for one hour. Disconnecting the battery or other manipulation cannot reduce this time. After connecting the battery the timer starts again for one hour.

NOTE:

Neutralizing Setting condition:
- In case of "SMARTRA status", "Learnt"
- Input correct Pin code by tester
Neutralizing meaning:
- Vehicle password (DPN Code) & SEK Code deletion.
- Permission of New DPN Learning.
  
  Fig 1: Neutralizing SMARTRA (1 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 2: Neutralizing SMARTRA (2 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 3: Neutralizing SMARTRA (3 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 4: Neutralizing SMARTRA (4 Of 4)
  Courtesy of KIA MOTORS AMERICA, INC.