LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo LX, 2.4 8 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).
    Fig 1: Identifying Crash Pad Lower Panel
    G06387180Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the steering column shaft (Refer to the STEERING COLUMN & SHAFT ).
  4. Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening the screw.
    Fig 2: Identifying SMARTRA Unit
    G06387181Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals