System Inspection
- Check intake system/vapor hoses for air leakage or disconnection
- Visually/physically inspect the following items:
- Intake system for air leakage
- Vapor hoses for cracks or disconnection
- Has a problem been found in any of the above areas?
YES
- Repair it and go to "VERIFICATION OF VEHICLE REPAIR " procedure
NO
- Clear DTC and test-drive the vehicle under the "Enable Conditions" shown in DTC DETECTING CONDITION CHART. After the test, if this DTC is set, go to "INSPECTION & REPAIR " procedure. If not, troubleshooting is completed.
- Visually/physically inspect the following items: