System Inspection
- Check intake system for blockage
- Visually/physically inspect the following items:
- Air cleaner filter element for excessive dirt or for any foreign objects
- Hoses of intake system for blockage
- Throttle body inlet for damage or for any foreign objects
- Throttle plate for carbon deposits
- Has a problem been found in any of the above areas?
YES
- Repair it and go to "VERIFICATION OF VEHICLE REPAIR " procedure
NO
- Clear DTC and test-drive the vehicle under the "Enable Conditions" shown in DTC DETECTING CONDITION CHART. After the test, if this DTC is set, go to "INSPECTION & REPAIR " procedure. If not, troubleshooting is completed.
- Visually/physically inspect the following items: