LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels >> Alignment >> Repair Procedures >> Rear Wheel Alignment >> Toe Adjustment

Toe Adjustment

  1. Loosen the nut holding the assist arm cam bolt (A).
  2. Adjust rear toe by turning the rear assist arm cam bolt (A) clockwise or counter clockwise. Toe adjustment should be made by turning the right and left cam bolt by the same amount.

    Toe-in

    Total: 0.2°±0.2°

    Individual: 0.1°± 0.1°

    Fig 1: Adjusting Rear Wheel Toe
    G06386634Courtesy of KIA MOTORS AMERICA, INC.
    CAM BOLT TURNING DIRECTION

    Cam bolt Turning direction Toe
    LH (Driver's side) Clockwise Decrease (Toe in)
    Counter clockwise Increase (Toe out)
    RH Clockwise Increase (Toe out)
    Counter clockwise Decrease (Toe in)
  3. When completing the toe adjustment, tighten the nut to specified torque.

    Tightening torque Nm (kgf.m, lb-ft): 

    80 ~ 100 (8.0 ~ 10.0, 58 ~ 72)

scientia non olet · About LEMON Manuals