LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle Control System -- A5GF1) >> Input Speed Sensor >> Repair procedures (A5GF1) >> Removal

Repair procedures (A5GF1): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air cleaner assembly. (Refer to REPAIR PROCEDURES (A5GF1) ).
  4. Remove the input shaft speed sensor connector.
  5. Remove the input shaft speed sensor (A).
    Fig 1: Identifying Input Shaft Speed Sensor
    G06486983Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals