LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Axle Assembly >> Front Hub - Axle >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

  1. Remove the snap ring (A).
    Fig 1: Removing Snap Ring
    G06386540Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the hub assembly from the knuckle assembly.
    1. Install the front knuckle assembly (A) on press.
    2. Lay a suitable adapter (B) upon the hub assembly shaft.
      Fig 2: Identifying Front Knuckle Assembly & Adapter
      G06386541Courtesy of KIA MOTORS AMERICA, INC.
    3. Remove the hub assembly (B) from the knuckle assembly (A) by using press.
      Fig 3: Removing Hub Assembly & Knuckle Assembly Using Press
      G06386542Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the hub bearing inner race from the hub assembly.
    1. Install a suitable tool (A) for removing the hub bearing inner race on the hub assembly.
    2. Lay the hub assembly and tool (A) upon a suitable adapter (B).
    3. Lay a suitable adapter (C) upon the hub assembly shaft.
    4. Remove the hub bearing inner race (D) from the hub assembly by using press.
      Fig 4: Removing Hub Bearing Inner Race From Hub Assembly
      G06386543Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the hub bearing outer race from the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter (B).
    2. Lay a suitable adapter (C) upon the hub bearing outer race.
    3. Remove the hub bearing outer race from the knuckle assembly by using press.
      Fig 5: Removing Hub Bearing Outer Race From Knuckle Assembly
      G06386544Courtesy of KIA MOTORS AMERICA, INC.
  5. Replace hub bearing with a new one.
scientia non olet · About LEMON Manuals