LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Identifying Cruise Control Switch Connector & Terminals
    G06386119Courtesy of KIA MOTORS AMERICA, INC.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    CRUISE CONTROL SWITCH RESISTANCE

    Function switch Terminal Resistance
    Cruise Main RH 1-2 3.9kΩ ± 5%
    Cancel RH 1-3 0Ω ± 5%
    Set/Coast RH 1-3 220Ω ± 5%
    Resume/Accel RH 1-3 910Ω ± 5%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals