LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rio Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Identifying Cruise Control Switch Connector
    G06831873Courtesy of KIA MOTORS AMERICA, INC.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    RESISTANCE SPECIFICATION CHART

    Function switch Terminal Resistance
    CANCEL 6-7 0Ω
    SET - 6-7 220Ω ± 1%
    RES + 6-7 910Ω ± 1%
    ON / OFF 7-8 3900Ω ± 1%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals