LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2010 >> Rio Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC P0300: Random/Multiple Cylinder Misfire Detected >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item Detecting Condition Possible Cause
DTC Strategy
  • Engine roughness through crankshaft speed fluctuation
  • Poor connection
  • Ignition system
  • Fuel system
  • Intake/exhaust air system
  • Ignition timing
  • Injector
  • ECM
Enable Conditions
  • Engine speed 510~6480rpm
  • Engine load > Zero torque.
  • Eng. load change < Max.
  • Eng. speed change < Max.
  • Calculated wheel acceleration < 20~38
  • Time after engine start > 0
  • Intake air temperature > -30°C (-22°F)
 
Case1 Threshold Value
  • Misfire rate for FTP (Federal Test Procedure) emission thresh >5%
Diagnostic Time
  • 1000 revs
 
MIL ON Condition
  • 2 driving cycle
Case2 Threshold Value
  • 4% < Misfire rate for catalyst damage < 22%
Diagnostic Time
  • 200 revs
 
MIL ON Condition
  • Immediately (Blink)