General Information: General Description
When a new SRSCM is installed on a vehicle after SRSCM failure, the SRSCM (ACU) variant coding must be performed. Since a new SRSCM is normally supplied in an unset state, the ACU has to be set up, based on the vehicle specifications, by operating the ACU Variant Coding procedure.
The SRSCM checks its specifications in order to run the airbag system normally.
If the airbag warning light is flickering continuously, the SRSCM (ACU) Variant Coding is not completed.
NOTE:
The SRSCM Variant Coding is available only one time. After the Variant Coding procedure is finished, it is impossible to retry SRSCM Variant Coding.
The warning lamp operates as follows during SRSCM (ACU) Variant Coding Mode: It will be flashing every 1 second before the Variant Coding is completed normally.
The warning lamp operates as follows during SRSCM (ACU) Variant Coding Mode: It will be flashing every 1 second before the Variant Coding is completed normally.