Repair Procedures: Inspection

WARNING: This page is about a different car, the 2009 Kia Optima and 2009 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.

Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resistor must be used as shown.

Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
Courtesy of KIA MOTORS AMERICA, INC.
Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.

Fig 2: Wheel Speed Sensor Voltage Graph

Courtesy of KIA MOTORS AMERICA, INC.

V_low: 0.59 V-0.84 V

V_high: 1.18 V-1.68 V

Frequency range: 1-2500 Hz