LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Brake System) >> Master Cylinder >> Repair Procedures >> Reassembly

Repair Procedures: Reassembly

WARNING: This page is about a different car, the 2009 Kia Optima and 2009 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply genuine brake fluid to the rubber parts of the cylinder kit and grommets.
  2. Carefully insert the springs and pistons in the proper direction.
  3. Press the piston with a screwdriver (A) and install the cylinder pin (B).
    Fig 1: Installing Cylinder Pin
    G06366785Courtesy of KIA MOTORS AMERICA, INC.
  4. Press the piston with a screwdriver and install the retainer ring.
    Fig 2: Installing Retainer Ring
    G06366786Courtesy of KIA MOTORS AMERICA, INC.
  5. Install the proportioning valves (In case of CBS).
  6. Mount two grommets.
  7. Install the reservoir on the cylinder.
scientia non olet · About LEMON Manuals