LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Brake System) >> Brake Pedal >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2009 Kia Optima and 2009 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.

    Grease : LiG-2

    CAUTION: Coat the inner surface of the bushings with the specified grease.
  2. Before inserting the pin, apply the specified grease to the joint pin.
    Fig 1: Identifying Pin And Joint Pin
    G06366802Courtesy of KIA MOTORS AMERICA, INC.
  3. Adjust the brake pedal height and free play. (Refer to "BRAKE PEDAL & BRAKE SWITCH ADJUSTMENT ")
  4. Install the stop lamp switch.
scientia non olet · About LEMON Manuals