LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Brake System) >> Brake Line >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2009 Kia Optima and 2009 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake hose (C) from the brake line (A) using a flare-nut wrench (B).
    Fig 1: Disconnecting Brake Hose From Brake Line Using Flare-Nut Wrench
    G06366790Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the brake hose clip (B), and then remove the brake hose (A).
    Fig 2: Identifying Brake Hose Clip And Brake Hose
    G06366791Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the connector bolt (C) from the caliper, and disconnect the brake hose (A) from the caliper.
Fig 3: Identifying Brake Hose And Connector Bolt
G06366792Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals