Repair Procedures: Installation

WARNING: This page is about a different car, the 2009 Kia Optima and 2009 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.

Install a brake hose (A) on the caliper with tightening brake hose bolt (C) and washer (B).

Fig 1: Identifying Brake Hose And Brake Hose Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Connect the brake hose (A) to the brake line (C) using a flare-nut wrench (B).

Fig 2: Connecting Brake Hose To Brake Line Using Flare-Nut Wrench
Courtesy of KIA MOTORS AMERICA, INC.
Install the brake hose clip (B) to the brake hose bracket.

Fig 3: Identifying Brake Hose Clip
Courtesy of KIA MOTORS AMERICA, INC.
After installing the brake hose, bleed the brake system.
CAUTION:
- Check the brake hoses for interference and twisting.
- Check the brake hose and line joint for leaks, and tighten if necessary.