Control Circuit Inspection

IG "OFF" and disconnect ECM connector.
IG "ON" and ENG "OFF"
Measure voltage between 63 of ECM harness Connector (C144-A) and chassis ground.
Specification: Prix. B+

Fig 1: Measuring Voltage Between 63 Of ECM Harness Connector (C144-A) And Chassis Ground
Courtesy of KIA MOTORS AMERICA, INC.
Is the measured voltage within specification?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Check open in Engine warning lamp's filament.
- Repair open or short to ground in harness, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.