P0315: Camshaft Position (CMP) Sensor Error: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
- This DTC indicates that crank wheel tooth error has not been learned.
|
- Loosened CKPS
- Target wheel
- ECM
|
| Enable Conditions |
- 10% ≤ Engine load lt; 90%
- 2000 RPM ≤ engine speed ≤ 4000 RPM
- TEC (Tooth Error Correction) RPM stability timer gt; 10sec
- 0°C (32°F) < coolant temperature < 110°C (230°F)
- Not active disabling faults
|
| Threshold value |
- Distance driven without learning (during fuel cut off) tooth error ≥ 6500km(4038.91275 mile)
- Actual Value is higher or lower than calibrated value
|
| Diagnosis Time |
|
| MIL On Condition |
|