Power Circuit Inspection

IG "OFF" and disconnect TPS connector.
IG "ON" and ENG "OFF"
Measure voltage between terminal 4 of TPS harness connector and chassis ground.
Specification: Prix. 5V

Fig 1: Measuring Voltage Between Terminal 4 Of TPS Harness Connector And Chassis Ground
Courtesy of KIA MOTORS AMERICA, INC.
Is the measured voltage within specification?
YES
- Go to "SIGNAL CIRCUIT INSPECTION " procedure.
NO
- Repair open or short to ground in power harness, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.