LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Starter >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the LH exhaust manifold assembly.
  2. Supporting the engine with a safety jack, remove the LH side engine mounting bracket.
    Fig 1: Identifying LH Side Engine Mounting Bracket
    G06407946Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the starter cable from the B terminal on the solenoid, and the connector from the S terminal.
  4. Remove the 2 bolts (D) holding the starter, then remove the starter (E).

    TORQUE: 

    49.0 ~ 63.7 Nm (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) - starter mounting (D)

    Fig 2: Identifying Starter And Starter Bolts
    G06407947Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
  6. Connect the battery negative cable to the battery.
scientia non olet · About LEMON Manuals