Component Inspection

Check SMARTRA

1. IGN "ON" & Engine "OFF"
2. Neutralize Both "SMARTRA" and "ECM" and Register transponder key by scantool.
   CAUTION: *Pin code is required to Neutralize SMARTRA and to Register transponder key
3. Are Neutralizing and Registering completed normally ?

   YES 

   Perform the key teaching procedure with scantool. (All the keys must be retaught) and then go to "VERIFICATION OF VEHICLE REPAIR" procedure.

   NO 

   Substitute with a known-good SMARTRA and Perform Key teaching procedure. If the problem is corrected, replace SMARTRA and then go to "Verification of Vehicle Repair" procedure.