LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Scan Tool Check >> Abs Does Not Operate >> Inspection Procedures >> Check The Power Source Circuit.

Check The Power Source Circuit.

  1. Disconnect the connector from the ABS control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 18 of the ABS control module harness side connector and body ground.

    Specification: approximately B+

    Is the voltage within specification?

    YES 

    • Check the ground circuit.

    NO 

    • Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ABS control module. Repair if necessary.
    Fig 1: Checking Harness Or Connector Between Fuse Engine Compartment Junction Block And ABS Control Module
    G04883842Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals