LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Scan Tool Check >> Abs Does Not Operate >> Inspection Procedures >> Check The Ground Circuit.

Check The Ground Circuit.

  1. Disconnect the connector from the ABS control module.
  2. Check for continuity between terminals 1,4 of the ABS control module harness side connector and ground point.

    Is there continuity?

    YES 

    • Check the wheel speed sensor circuit.

    NO 

    • Repair an open in the wire and ground point.
    Fig 1: Checking Continuity Between Terminals ABS Control Module Harness Side Connector And Ground Point
    G04883843Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals