LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - F4A42 >> Output Speed Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the battery and air cleaner.
  2. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor, Connector, & Bolt
    G06386468Courtesy of KIA MOTORS AMERICA, INC.
    1. Disconnect the output shaft speed sensor connector (B).
    2. Remove the bolt (C).
    3. Inspect the output shaft speed sensor bore.
  3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals