Visual/Physical Inspection

Check immobilizer lamp circuit
1. Ignition "ON" & Engine "OFF"
2. Check if immobilizer lamp operates properly.
  NOTE: Right after ignition "ON", Immobilizer lamp lights up for 30sec. If lamp blinks 5 times after ignition "ON", there's any fault in immobilizer system.
3. Is immobilizer lamp operates properly?
  YES
  - Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
  NO
  - Go to "COMPONENT INSPECTION " procedure.