Scantool Diagnostics

■ Check DTC 

1. Install GDS and access the DTC screen.
2. Check for CAN communication DTC.
3. Clear DTCs and monitor the DTC screen while the vehicle is within the DTC Detecting Condition parameters.
4. Is the DTC cleared (DTC does not re-set)?

   YES 

   • Check connectors of each Modules for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
   • Go to "VERIFICATION OF VEHICLE REPAIR " procedure.

   NO 

   • Go to next procedure.