Fluid replacement

1. Clean the fluid level plug and the surface near.
2. Drain the fluid by removing the drain plug (B).
   NOTE: When the oil is warm, check or drain the oil.

   Remove the fluid level plug to help drain the fluid.

   Fig 1: Identifying Drain Plug

   Courtesy of KIA MOTORS AMERICA, INC.
3. Install the drain plug.

   Tightening torque: 

   20~30 Nm (2.0~3.0 kgf.m, 14.5~21.7 lb-ft)

4. Add fluid until the fluid flows out of the fluid level hole.
5. When the fluid dribbles out of the fluid level hole, install the fluid level plug.

Tightening torque: 

20~30 Nm (2.0~3.0 kgf.m, 14.5~21.7 lb-ft)