Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
(Refer to CRASH PAD )
Remove the ignition switch cover (A).

Fig 1: Identifying Ignition Switch Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the key warning switch and key illumination lamp (B) after disconnecting the 6P connector (A).

Fig 2: Identifying Key Illumination Lamp & Connector
Courtesy of KIA MOTORS AMERICA, INC.
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder after pushing lock pin (B) with key ACC.

Fig 3: Identifying Lock Pin
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Identifying Key Lock Cylinder
Courtesy of KIA MOTORS AMERICA, INC.